Garage Machines Universal Cylindrical Grinder

MODELS	RS-1 mm	RS-2 mm	RS-3 mm	RS-4 mm	RS-5 mm
Max. Grinding Length	225	355	600	1000	5000
Max. Height of Center	110	130	130	130	300
Max. Swing Over Table	202	254	254	254	600
Max. Grinding Diameter	40	76	101	101	460
No. of Table Feeds	-	3	3	3	3
Range of Table Feeds Per Minute	-	100-175-275	100-175-275	100-175-275	0-800
Max. Table Swivel	70	70	70	70	Fixed
Electrical Motor for table drive	-	1.5 hp 1440 rpm	1.5 hp 1440 rpm	1.5 hp 1440 rpm	3 HP
Workhead Swivel on either Side	900	900	900	900
Work Spindle Speeds	-	4	4	4	4
Work Spindle Speedsrange	-	58-80-105-130	58-80-105-130	58-80-105-130	45-130
Work head motor with 1440 rpm	1 h.p.	1 h.p	1 h.p	1 h.p	3 HP
Morse taper	MT-1	MT-3	MT-4	MT-4	MT-6
Traverse Movem110ent of wheel head max	88	88	88	88	300
Size of grinding wheel	304 X 25 X 801	355 X 38 X 127	355 X 38 X 127	355 X 38 X 127	760 X 50 X 75
RPM of grinding wheel (two range)	-	1650-2200	1650-2200	1650-2200	300
Wheel head motor with 1440 rpm	2 h.p.	3 h.p.	3 h.p.	3 h.p.	15 HP
Motor rpm for internal grinding attachment	1440 rpm	2800 rpm	2800 rpm	2800 rpm	3 HP / 3100rpm
Max. internal grinding depth	-	101	101	101	105
Motor rpm of work head & wheel head	1440 rpm	1440 rpm	1440 rpm	1440 rpm	800-1440 rpm
Floor Space	850 x 1180	1000 x 1525	1075 x 1825	1075 x 2400	11500 x 2100
Approx. Weight Kgs.	1050	1400	2100	2600	16000