Garage MachinesHydraulic Cylindrical Grinder

  

MODELS
 UNITS 600/800 1000/1200
SIZE & CAPACITY
Center height
 mm 130 155
Center distance
 mm 600/800 1000 / 1200
Max. grinding delta for efficiently grinding Std.
 mm 125 125
WHEEL HEAD
Peripheral surface speed (Two steps)
 m/sec. 28 28
Clockwise
 deg. 60 60
Counter clockwise
 deg. 45 45
Grinding wheel (delta x width x Bore)
 mm 350 x 40 x 127 400 x 40 x 127
INFEED SYSTEM
Rapid approach
 mm 40 40
Increment infeed on delta
 mm 0.005 0.005
infeed with hand wheel
 mm 60 60
* Infeed with hand wheel
 mm 95 95
** Max. plunge depth on delta
 mm 0.75 0.75
Infeed rate on delta variable
 mm/min 0.1 - 6 0.1 - 6
Spark off time
 sec. 0 - 30 0 - 30
TABLE TRAVERSE
Max. stroke
 mm 650 - 850 1050 - 1250
Min. stroke
 mm 10 10
Feed rate
 mm/min 30 - 4000 30 - 3500
Dwell at reversal
 sec.   0 - 30
Swivel
 deg. -3 + 9 -3 + 6
* Feed rate in steps
   6 6
WORK HEAD
Live & dead center type counter clockwise
 deg. 90 90
Taper bore
 MT 3 4
Spindle speed 6 steps
 RPM 45 - 250 45 - 250
** Steplessly variable
 RPM 30 - 500 30 - 500
TAIL STOCK
Adjustable pressure, taper bore
 MT 3 4
Quill travel
 mm 25 25
ELECTRICAL MOTORS
Wheel head
 kw. 2.2 3.7
Work head
 kw. 0.75 0.75
Internal grinding
 kw. 0.75 0.75
Hydraulic pump motor
 kw. 0.75 0.75
Coolant pump
 kw. 0.10 0.10
* Table feed
 kw. 0.37 0.37
INTERNAL GRINDING ATTACHMENT
Spindle housing bore
 mm 80 80
Standard spindle delta
 mm 60 x 250 60 x 250
Spindle speed standard
 RPM 18000 18000
FLOOR AREA
Width
 mm 1500 1500
Length
 mm 3350 x 3750 4250 x 4650