Sheet Metal & fabrication Machine Double Column Single Point Power Press
 |
CAPACITY IN TONS |
10 | 20 | 30 | 50 | 75 | 100 | 150 | 200 | 250 | 300 |
Bed to Ram Bottom |
8" | 9" | 9" | 12" | 13" | 15" | 19" | 20" | 24" | 26" |
Bed Size |
11" x 13" | 13" x 16" | 15" x 17" | 18" x 20" | 22" x 22" | 23" x 25" | 28" x 25" | 31" x 32" | 34" x 36" | 36" x 40" |
Stroke Length |
2" | 2.1/4" | 2.1/2" | 3" | 3.1/2" | 4" | 5" | 5.1/2" | 6" | 7" |
Crank Shaft Dia |
2.3/4" | 3" | 3.1/2" | 4" | 4.3/4" | 6" | 7" | 8" | 8.1/2" | 9" |
Gear Dia |
16" | 22" | 24" | 26" | 30" | 34' | 41" | 42" | 46" | 48" |
Fly Wheel Dia |
20" | 24" | 27" | 30" | 34" | 38' | 39" | 48" | 52" | 56" |
Hole in Ram for Die Clamping |
1" | 1.1/8" | 1.1/4" | 1.1/2" | 1.3/4" | 2" | 2" | 2.1/2" | 3" | 3" |
Floor to Top of Bed |
24" | 26" | 27.1/2" | 31" | 31" | 32" | 30" | 35" | 36" | 36" |
Overall Height without Motor |
52" | 62" | 68" | 76" | 84" | 86" | 99" | 100" | 115" | 125" |
Approx. Floor Area Required |
30" x 25" | 30" x 27" | 33" x 27" | 40" x 30" | 40" x 30" | 42" x 34" | 54" x 40" | 63" x 45" | 69" x 48" | 75" x 50" |
No. of Stroke per Minutes |
65 | 60 | 60 | 50 | 45 | 35 | 30 | 30 | 25 | 22 |
Power Required |
2 H.P. | 2 H.P. | 3 H.P. | 5 H.P. | 7.1/2 H.P. | 10 H.P. | 15 H.P. | 20 H.P. | 25 H.P. | 30 H.P. |
